Vol.19 CODE MANAGEMENT
It is quite tough to manage tools since so many tools are required for turret punch press.
As a way to simplify the management even a little, there is "code management".
In particular, the addition of “special shape cords” makes it even easier to manage especially forming tool and special shapes.
CODE MANAGEMENT FOR FORMING TOOLS AND SPECIAL SHAPES
The following advantages can be obtained by adding a "special shape code" to special shape or forming tools.
- 1.It is possible to unify management of tool, sheet metal processing drawing,
tool list of automatic professional and work instruction, etc. - 2.When ordering a tool again, you can easily place an order only with the "special shape code".
We currently mark “special codes” on tools according to customer requirements, but we will continue to promote “special code”.
(Alphanumeric notation)
1.「Identified code for forming, cluster and other special tools」 | Example: 00125-23 C=0.15 |
2.「Identified code for special shapes and dimension」 | Example: 00125-23 Special shape 10X20 C=0.15 |
3. 「Dimension」 | Example: Special shape 10X20 C=0.15 |
- ※Although "special shape codes" will be numbered by our company, we will also mark your own codes according to the instructions. (Drawing number + model number notation is also possible.
Example: NC1082-01)
INTRODUCTION OF STAMPING TOOL
PRODUCT LOT NUMBER AND MANUFACTURING DATE STAMP
Recently, the need for production lot management and production date management has been highlighted for quality assurance.
Introducing “lot numbering tool” and “date stamping tool”, which are indispensable for the traceability of products required by ISO.
“NUMBERING TOOL” FOR PRODUCT LOT
Please use "Numbering tool" for stamping the production lot number.
The lot number can be changed quickly without replacing it with a rotary mechanism.
- ・The arrangement of characters is 12 equal parts, and the contents can be freely selected.
(Standard is [0~9][-] and [Blank]) - ・The number of digits is 5 to 7 digits.
- ・HSS (High-speed steel) with excellent durability is used for stamping.
< Purpose of use >
- ・Production lot number
- ・Date of manufacturing
- ・Parts number
“DATE MARK TOOL” FOR MANUFACTURING DATE
Please use “date mark tool” for the stamp of the manufacturing date.
The date can be easily changed by rotating middle arrow with a screwdriver.
There are 3 types of date as follows.
- ・Year, Month Type
- ・Month Type
- ・Year Type
Other marks are possible upon request.
In addition to the stamps introduced here, various stamped types are available. Please contact us.
PDF Download
vol.1 COUNTERMEASURES FOR SLUG PULLING IN PUNCHING PROCESS
vol.2 LIFE COUNTERMEASURE FOR TOOLING
Vol.3 TOOL MAINTENANCE
Vol.4 FORMING TOOL
Vol.5 MATERIAL FOR TOOLING
Vol.6 FOR CLEARANCE OF THE CUTTING DIE
Vol.7 ABOUT TURRET PUNCH PRESS MACHINE
Vol.8 VARIOUS KINDS OF SPECIAL SHAPE
Vol.9 PARTS NAME OF STANDARD TOOLING
Vol.10 EACH NAMES OF FORMING TOOL
Vol.11 MATERIAL PROPERTIES (STEEL)
Vol.12 MATERIAL PROPERTIES
Vol.13 CALCULATION FORMULAS FREQUENTLY USED IN SHEET METAL
Vol.14 HEIGHT ADJUSTMENT FREE TOOL
Vol.15 HOW TO DRAW AND READ DRAWINGS
Vol.16 HOW TO DRAW AND READ DRAWING (PRACTICAL USE)
Vol.17 SHAPE INSTRUCTION FOR FORMING TOOLS(1)
Vol.18 SHAPE INSTRUCTION FOR FORMING TOOLS(2)
Vol.19 CODE MANAGEMENT
Vol.20 BENDING TECHNICAL INFORMATION
Vol.21 TECHNICAL COUNSELING FAQ(1) "COUNTERMEASURES FOR GALLING"
Vol.22 TECHNICAL COUNSELING FAQ(2) "BURRING FOR THREAD FORM"
Vol.23 TECHNICAL COUNSELING FAQ(3) "PITCH OF SINGLE PIERCING"
Vol.24 TECHNICAL COUNSELING FAQ(4) "SHEAR OPTIONS"
Vol.25 TECHNICAL COUNSELING FAQ(5) "HOLDING MARK"
Vol.26 TECHNICAL COUNSELING FAQ(6) "SOLUTION FOR SLUG PULLING OF A SHEET METAL WITH PROTECTIVE FILM"
Vol.27 TECHNICAL COUNSELING FAQ(7) "MATERIAL WARPING PREVENTION DURING"
Vol.28 TECHNICAL COUNSELING FAQ(8) "WARPING PREVENTION OF BLANKING OUT"
Vol.29 TECHNICAL COUNSELING FAQ(9) "COUNTERSINK FOR COUNTERSUNK SCREW"
Vol.30 THE ORDERING GUIDE(1) "HOW TO INSTRUCT SHAPE AND DIMENSIONS"
Vol.31 THE ORDERING GUIDE(2) "REFERENCE KEY DIRECTION"
Vol.32 THE ORDERING GUIDE(3) "ANGLE INDICATION OF ANGLED TOOL"
Vol.33 THE ORDERING GUIDE(4) "SELECT SPECIFICATION OF PUNCH"
Vol.34 THE ORDERING GUIDE(5) "DIE SPECIFICATION SELECTION"