NOTE

• 1）Please indicate the dimension "A or B" and "C or D" when you order.
  You can also inform the dimension "A,B,C or D" and angle(E).
• 2）Please inform if need a flat area on C or D.
• 3）The forming limit height(H) is as follows.
  
• ※The limit of forming height is depend on the material and thickness and shape.
  For more information, please contact us.
• 4）Dimension(S) is required more than material thickness.
  
• 5）Can also be produced tools to make forming and piercing at the same time.