Chày cối tạo hình
L-BENDING
LANCE (L-BENDING)
L-BENDING
FORMING UP
USAGE
Used for jointing the workpiece from which multiple products are taken.
It is easy to process the projection unlike micro joint.
Forming process of lance like L-shape.
Used for hook, positioning and stopper.
EXAMPLES
L forming of the end of a workpiece.
For fixing LED parts.
(Symmetrical shape)
For a hook of a shelf.
Used for a stopper.
This tool bends and cuts a workpiece at the same time.
SHAPES OVERVIEW
The workpiece A and B are jointed by square half punch.
NOTE
- 1)Please indicate the each dimension when you order.
- 2)In case of forming without pre-hole, it is necessary to put the angle(D) to prevent mistakes strips.
The angle(D) must be more than 2°.
(Recommended angle is more than 5°.) - 3) Tool life is improved by making the pre-hole.
-
4)Forming direction is upward.
In case of forming down, the moving trouble will occurs.