Chày cối tạo hình
KNOCKOUT
KNOCKOUT
KNOCKOUT
FORMING UP
FORMING DOWN
W-KNOCKOUT
FORMING SHAPE
FORMING UP
FORMING DOWN
USAGE
Used for the back of an electrical appliance and if necessary, a new wiring is provided by removing the formed part and making a hole.
Forming process of piercing a hole and keep the slug on the sheet metal by tabs.
When using a hole, remove the slug using a screwdriver.
EXAMPLES
"Strength of connecting part" changes with the number and the width of tabs.
SHAPES OVERVIEW
Forming process of piercing a hole and keep the slug on the sheet metal by tabs.
NOTE
- 1)Please indicate the dimension of A or B, when you order.
(Indication of the hole diameter(A) is common.) - 2)The height(H) is almost same as the material thickness.
It also may be used in flat that pushed back after the knockout.In this case, please use the flattening tool. - 3)The number and width of the tab depends on the material, material thickness and the hole diameter.
- 4)We also can produce the "double knockout" that have 2 size of hole diameter.
PDF DOWNLOAD