HERRAMIENTAS FORMADO
DOUBLE BRIDGE
TRIPLE BRIDGE
RIDGE, DOUBLE BRIDGE
BRIDGE, DOUBLE BRIDGE
FORMING UP
FORMING DOWN
USAGE
Used for bottom parts of products such as OA machinery,
sinking a countersunk screw head,
fixing a printed circuit board and a stopper.
Forming process of lance like a bridge.
EXAMPLES
It is a hemispherical bridge.
If the left and right side of the shape is punched with another tool before forming a bridge,
the cutting edge of the forming tool will maintain its sharpness for a long time.
This bridge has enough width and durability as a stopper.
Click to zoomSHAPES OVERVIEW
Bridge is formed on the workpiece.
Used for sinking a head of bolts or nuts.
Used for the seat of product.
Used for the guide of printed-circuit board.
NOTE
-
1）Please indicate the dimension "A or B" and "C or D" when you order.
You can also indicate the dimension "A,B,C or D" and angle(E). - 2）Please indicate if need a flat area on C or D.
-
3）The forming limit height(H) is as follows.
-
※The limit of forming height is depend on the material and thickness and shape.
For more information, please contact us.