FORMING TOOLS
Z-BENDING
LANCE (Z-BENDING)
Z-BENDING
FORMING UP
USAGE
Used for jointing the workpiece from which multiple products are taken.
It is easy to process the projection unlike micro joint.
Forming process of lance like Z-shape.
Used for hook, positioning and stopper.
EXAMPLES
For attaching electronic parts.
The guide part is formed on the edge of the Z-BENDING.
Used for a hook of steel furniture.
This is the method in which the tool processes z-bending only and the hole is processed with another tool.
It is efficient to prevent the wear of the cutting edge when punching a stainless steel sheet.
For a stopper.
This tool bends and cuts a workpiece at the same time.
SHAPES OVERVIEW
The workpiece A and B are jointed by square half punch.
NOTE
- 1)Please indicate the each dimension when you order.
-
2)In case of forming without pre-hole, it is necessary to put the angle(D) to prevent mistakes strips.
The angle(D) must be more than 2°.
(Recommended angle is more than 5°) - 3)Tool life is improved by making the pre-hole.
-
4)Forming direction is upward.
In case of forming down, the moving trouble will occurs.