FORMING TOOLS
KNOCKOUT
KNOCKOUT
KNOCKOUT
FORMING UP
FORMING DOWN
W-KNOCKOUT
FORMING SHAPE
FORMING UP
FORMING DOWN
USAGE
Used for the back of an electrical appliance and if necessary, a new wiring is provided by removing the formed part and making a hole.
Forming process of piercing a hole and keep the slug on the sheet metal by tabs.
When using a hole, remove the slug using a screwdriver.
EXAMPLES
"Strength of connecting part" changes with the number and the width of tabs.
Click to zoomSHAPES OVERVIEW
Forming process of piercing a hole and keep the slug on the sheet metal by tabs.
NOTE
-
1）Please indicate the dimension of A or B, when you order.
（Indication of the hole diameter(A) is common.） -
2）The height(H) is almost same as the material thickness.
It also may be used in flat that pushed back after the knockout.In this case, please use the flattening tool.
- 3）The number and width of the tab depends on the material, material thickness and the hole diameter.
-
4）We also can produce the "double knockout" that have 2 size of hole diameter.
